MJ Series - High Voltage Power Supply

The MJ Series of 15 watt high voltage supplies are air insulated, fast response units, with tight regulation and low arc discharge currents.

Typical Applications

  • Ion Implantation
  • Vapor Deposition
  • E-Beam Lithography

Input Voltage
210-250V RMS,48-63Hz single phase, 0.25 amperes


Output Voltage
from 0-3kVDC through 0-30kVDC

Output Power
15W

Polarity
Available as positive or negative (replace x in part number with -P or -N)


Operating Ambient Temperature
-20 degree C to +60 degree C

Ripple
<0.05% RMS of rated voltage at full load


Programming
Remote voltage and/or current control via 0 - +10 volt signal or potentiometers

Standards
EN61000-3-2, Line Harmonics.
EN61010/ IEC61010, Safety.
EN61000-6-4, Conducted and RadiatedEmissions.
EN61000-6-2:2005, Conducted andRadiated Immunity.
2011/65/EU, Restriction of the use ofHazardous Substances (RoHS)

SeriesMax. Output Voltage Max. Output Current Max. Output PowerInput VoltageRipple
MJ3X50000 - 3kV5 mA15 WSingle Phase<0.05%
MJ3P50000 - 3kV5 mA15 WSingle Phase<0.05%
MJ3N50000 - 3kV5 mA15 WSingle Phase<0.05%
MJ5X30000 - 5kV3 mA15 WSingle Phase<0.05%
MJ5P30000 - 5kV3 mA15 WSingle Phase<0.05%
MJ5N30000 - 5kV3 mA15 WSingle Phase<0.05%
MJ10X15000 - 10kV1.5 mA15 WSingle Phase<0.05%
MJ10P15000 - 10kV1.5 mA15 WSingle Phase<0.05%
MJ10N15000 - 10kV1.5 mA15 WSingle Phase<0.05%
MJ15X10000 - 15kV1 mA15 WSingle Phase<0.05%
MJ15P10000 - 15kV1 mA15 WSingle Phase<0.05%
MJ15N10000 - 15kV1 mA15 WSingle Phase<0.05%
MJ20X7000 - 20kV0.7 mA15 WSingle Phase<0.05%
MJ20P7000 - 20kV0.7 mA15 WSingle Phase<0.05%
MJ20N7000 - 20kV0.7 mA15 WSingle Phase<0.05%
MJ30X4000 - 30kV0.4 mA15 WSingle Phase<0.05%
MJ30P4000 - 30kV0.4 mA15 WSingle Phase<0.05%
MJ30N4000 - 30kV0.4 mA15 WSingle Phase<0.05%
MJ Series