MK Series - High Voltage Power Supply

The MK Series of 75 watt high voltage supplies areair insulated, fast response units, with tight regulation and low arc discharge currents.

Typical Applications

  • Semiconductor
  • Vacuum/Plasma
  • Ion Beam Deposition

Input Voltage
198-253V RMS,48-63Hz single phase



Output Voltage

from 0-1kVDC through 0-60kVDC

Output Power
75W

Polarity
Available as positive or negative (replace x in part number with -P or -N)


Operating Ambient Temperature

-20 degree C to +60 degree C

Ripple

Better than 0.03% RMS of rated voltage +0.5V at full load

Programming
Remote voltage and/or current control via 0 - +10 volt signal or potentiometers

Standards
EN61000-3-2, Line Harmonics
EN61010/ IEC61010, Safety
EN61000-6-4, Conducted and Radiated Emissions
EN61000-6-2:2005, Conducted and Radiated Immunity
2011/65/EU, Restriction of the use of hazardoussubstances (RoHS

SeriesMax. Output Voltage Max. Output Current Max. Output PowerInput VoltageRipple better than
MK1N75L0 - 1 kV75 mA75 WSingle Phase0.03%
MK1.5N50L0 - 1.5 kV50 mA75 WSingle Phase0.03%
MK2N37.5L0 - 2 kV37.5 mA75 WSingle Phase0.03%
MK3N25L0 - 3 kV25 mA75 WSingle Phase0.03%
MK5N15L0 - 5 kV15 mA75 WSingle Phase0.03%
MK10N7.50 - 10 kV7.5 mA75 WSingle Phase0.03%
MK15N50 - 15 kV5 mA75 WSingle Phase0.03%
MK20N3.70 - 20 kV3.7 mA75 WSingle Phase0.03%
MK25N30 - 25 kV3 mA75 WSingle Phase0.03%
MK30N2.50 - 30 kV2.5 mA75 WSingle Phase0.03%
MK35N20 - 35 kV2 mA75 WSingle Phase0.03%
MK40N1.80 - 40 kV1.8 mA75 WSingle Phase0.03%
MK50N1.50 - 50 kV1.5 mA75 WSingle Phase0.03%
MK60N1.20 - 60 kV1.2 mA75 WSingle Phase0.03%