HV switch, variable on-time, low on-resistance, SiC & Trench FET

The solid-state switches have extreme rise and fall times. If your application does not require the full switching speed we suggest you the use of the speed limiting option S-TT (rise & fall times slower by approx. 50%) in combination with the input low pass filter option LP. The speed limiting options help to minimize the high frequency difficulties typical for fast high voltage pulse circuits  (e.g. self oscillating, self re-triggering, ringing etc.) and simplify the EMC design in general.

Features:

  • Extremely low on-resistance
  • Robust regarding overload and voltage reversal
  • Low dynamic switching losses, extremely low turn-on losses

Application Note

Silicon Carbide (SiC) switches in LC2 technology. Robust and transient proof. In many cases no need for extra cooling measures thanks to extremely low on-resistance.

Switch ModelMax. Voltage (kV)Peak Current (A)Peak Power (MW)On-Resist. (Ω)On-Time (ns)Housing Dimensions (mm3 )Datasheet
HTS 61-15-SiC61500.90.24120…∞ 103 x 70 x 35
HTS 61-30-SiC6300 1.80.12120…∞ 103 x 70 x 35
HTS 61-60-SiC6600 3.60.06120…∞ 115 x 75 x 75
HTS 61-120-SiC61200 7.20.03120…∞ 175 x 75 x 75
HTS 121-15-SiC12150 1.80.48120…∞ 103 x 70 x 35
HTS 121-30-SiC12300 3.60.24120…∞ 103 x 70 x 35
HTS 121-60-SiC12600 7.20.12120…∞ 115 x 75 x 75
HTS 121-120-SiC121200 14.40.06120…∞ 175 x 100 x 75
HTS 121-180-SiC121800 21.60.04120…∞ 240 x 150 x 80
HTS 121-360-SiC12360043.20.02120…∞ 240 x 150 x 150
HTS 151-15-SiC15150 2.250.56120…∞ 175 x 75 x 56
HTS 151-30-SiC15300 4.50.28120…∞ 175 x 75 x 56
HTS 151-60-SiC1560090.14120…∞ 125 x 125 x 75
HTS 151-120-SiC151200180.07120…∞ 175 x 125 x 75
HTS 151-180-SiC151800270.047120…∞  240 x 125 x 80
HTS 151-360-SiC153600540.023120…∞  240 x 125 x 150
HTS 201-15-SiC2015030.8150…∞ 200 x 75 x 56
HTS 201-30-SiC2030060.4150…∞ 200 x 75 x 56
HTS 201-60-SiC20600120.2150…∞ 200 x 150 x 56
HTS 201-120-SiC201200240.1150…∞ 200 x 150 x 80
HTS 201-180-SiC201800360.067150…∞ 252 x 175 x 80
HTS 201-240-SiC202400480.05150…∞ 312 x 175 x 80
HTS 201-300-SiC203000600.04150…∞ 372 x 175 x 80
HTS 201-600-SiC2060001200.02150…∞ 372 x 175 x 150
HTS 241-15-SiC24150 3.60.96200…∞ 252 x 75 x 56
HTS 241-30-SiC24300 7.20.48200…∞ 252 x 75 x 56
HTS 241-60-SiC24600 14.40.24200…∞ 252 x 175 x 56
HTS 241-120-SiC241200 28.80.12200…∞ 200 x 175 x 80
HTS 241-180-SiC24180043.20.08200…∞ 252 x 175 x 80
HTS 241-240-SiC24240057.60.06200…∞ 312 x 175 x 80
HTS 241-300-SiC243000720.048200…∞ 372 x 175 x 80
HTS 241-600-SiC2460001440.024200…∞ 372 x 175 x 150
HTS 301-15-SiC30150 4.5 1.12200…∞ 275 x 75 x 58
HTS 301-30-SiC3030090.56200…∞ 275 x 75 x 58
HTS 301-60-SiC30600180.28200…∞ 275 x 150 x 58
HTS 301-120-SiC301200360.14200…∞ 225 x 225 x 80
HTS 301-180-SiC301800540.093200…∞ 252 x 225 x 80
HTS 301-240-SiC302400720.07200…∞ 312 x 225 x 80
HTS 301-300-SiC303000900.056200…∞ 372 x 225 x 80
HTS 301-600-SiC3060001800.028200…∞ 372 x 225 x 150
HTS 401-15-SiC401506 1.44200…∞ 350 x 75 x 58
HTS 401-30-SiC40300120.72200…∞ 350 x 75 x 58
HTS 401-60-SiC40600240.36200…∞ 350 x 150 x 58
HTS 401-120-SiC401200480.18200…∞ 350 x 150 x 80
HTS 401-180-SiC401800720.12200…∞ 312 x 300 x 80
HTS 401-240-SiC402400960.09200…∞ 372 x 300 x 80
HTS 401-300-SiC4030001200.072200…∞ 432 x 300 x 80
HTS 401-600-SiC4060002400.036200…∞ 432 x 300 x 150
HTS 501-15-SiC50150 7.5 1.76250…∞ 252 x 150 x 58
HTS 501-30-SiC50300150.88250…∞ 252 x 200 x 58
HTS 501-60-SiC50600300.44250…∞ 372 x 150 x 58
 HTS 501-120-SiC501200600.22250…∞ 372 x 300 x 58
 HTS 501-240-SiC5024001200.11250…∞ 372 x 300 x 90
 HTS 501-480-SiC5048002400.055250…∞ 372 x 300 x 160
HTS 701-15-SiC70150 10.5 2.4250…∞ 312 x 150 x 58
HTS 701-30-SiC7030021 1.2250…∞ 312 x 200 x 58
HTS 701-60-SiC70600420.6250…∞ 492 x 200 x 58
HTS 701-120-SiC701200840.3250…∞ 492 x 200 x 80
HTS 701-180-SiC7018001260.2250…∞ 492 x 300 x 58
HTS 701-240-SiC7024001680.15250…∞ 492 x 200 x 150
HTS 901-15--SiC90150 13.5 3.4250…∞ 372 x 150 x 68
HTS 901-30-SiC9030027 1.52250…∞ 372 x 200 x 68
HTS 901-60-SiC90600540.76250…∞ 552 x 200 x 68
 HTS 901-120-SiC9012001080.38250…∞ 552 x 200 x 90
 HTS 901-180-SiC9018001620.253250…∞ 552 x 250 x 90
HTS 1001-15-SiC10015015 3.36250…∞ 432 x 150 x 68
HTS 1001-30-SiC10030030 1.68250…∞ 432 x 200 x 68
HTS 1001-60-SiC100600600.84250…∞ 612 x 150 x 68
HTS 1001-120-SiC10012001200.42250…∞ 612 x 200 x 90
HTS 1001-180-SiC10018001800.28250…∞ 612 x 250 x 90
HTS 1201-15-SiC120150184250…∞ 552 x 150 x 68
HTS 1201-30-SiC120300362250…∞ 552 x 200 x 68
HTS 1201-60-SiC120600721250…∞ 552 x 200 x 90
HTS 1201-120-SiC12012001440.5250…∞ 552 x 250 x 90
HTS 1401-15-SiC14015021 4.8250…∞ 672 x 150 x 68
HTS 1401-30-SiC14030042 2.4250…∞ 672 x 200 x 68
HTS 1401-60-SiC14060084 1.2250…∞ 672 x 250 x 90
HTS 1401-120-SiC14012001680.6250…∞ 672 x 300 x 90
HTS 1601-15-SiC16015024 5.44250…∞ 672 x 150 x 68
HTS 1601-30-SiC16030048 2.72250…∞ 672 x 200 x 68
HTS 1601-60-SiC16060096 1.36250…∞ 672 x 250 x 90
HTS 1601-120-SiC16012001920.68250…∞ 672 x 300 x 90

Trench FET

Switch ModelMax. Voltage (kV)Peak Current (A)Peak Power (MW)On-Resist. (Ω)On-Time (ns)Housing Dimensions (mm3 )Datasheet
HTS 051-120-B 0.5 12000.60.01 150…∞ 89 x 64 x 27
HTS 051-260-B 0.5 2600 1.30.005 150…∞ 89 x 64 x 27
HTS 31-12-B 31250.3750.5 150…∞ 89 x 64 x 27
HTS 31-125-B 3.61250 4.50.06 300…∞ 200 x 76 x 26
HTS 31-250-B 3.6250090.03 300…∞ 252 x 200 x 45
HTS 31-375-B 3.63750 13.50.02 350…∞ 312 x 200 x 45
HTS 61-12-B 61250.751150…∞ 89 x 64 x 27
HTS 61-25-B 6250 1.50.5 180…∞ 115 x 64 x 27
HTS 71-62-B 7.2625 4.50.24 300…∞ 200 x 76 x 26
HTS 71-125-B 7.2125090.12 300…∞ 252 x 200 x 45
HTS 71-187-B 7.21875 13.50.08 350…∞ 312 x 200 x 45
HTS 81-12-B 8.4125 1.5 1.4150…∞ 135 x 64 x 27
HTS 81-25-B 8.4250 2.10.7 180…∞ 135 x 64 x 27
HTS 101-12-B 10.8125 1.35 1.8200…∞ 206 x 70 x 35
HTS 101-25-B 10.8250 2.70.9 250…∞ 206 x 70 x 35
HTS 101-125-B 10.81250 13.50.18 350…∞ 312 x 200 x 45
HTS 121-30-B 12300 3.60.8 300…∞ 153 x 102 x 25
HTS 141-62-B 14.462590.48 300…∞ 252 x 200 x 45
HTS 151-12-B 151251.875 2.4200…∞ 212 x 70 x 35
HTS 151-25-B 15250 3.75 1.2250…∞ 212 x 70 x 35
HTS 181-12-B 18125 2.253200…∞ 263 x 70 x 35
HTS 181-25-B 18250 4.5 1.5250…∞ 263 x 70 x 35
HTS 211-12-B 21.6 125 2.7 3.4200…∞ 263 x 70 x 35
HTS 211-25-B 21.6250 5.4 1.7200…∞ 263 x 70 x 35
HTS 211-62-B 21.6625 13.50.72 350…∞ 312 x 200 x 45
OptionDescription
B-CONBeginner's Configuration: The standard switch is equipped with various options to simplify first time experiments for users which are inexperienced with high voltage and high frequency circuit design. The beginner's configuration includes option FH and PT-HV for easy wiring and attachment without printed circuit boards
HFBHigh Frequency Burst: Improved burst capability of driver by means of external buffer capacitors. Recommended if more than 10 pulses with less than 10 μs spacing are generated.
HFSHigh Frequency Switching: External supply of auxiliary driver voltage (50-350 VDC according to type). Necessary if the specified “Maximum Operating Frequency” shall be exceeded. (2)
LPLow Pass: Low pass filter at the control input. Propagation delay time will be increased by ~50 ns. Jitter + 500 ps.  Improved noise immunity and  less critical wiring in high speed applications. (3)
FASTFaster Switching Times (-30 to -40%) due to increased driver power. Minimum on-times will be reduced by about 40 to 50%. For selected high current switches only. Please consult factory. (2)  
S-ONSoft Turn-On:  “Turn-On Rise Time” increased by ~20%. Simplified EMC design and less critical wiring if the shortest possible edge steepness is not required. (3)
S-OFFSoft Turn-Off: “Turn-Off Rise Time” increased by ~20%. Simplified EMC design and less critical wiring if the shortest possible edge steepness is not required. (3)
S-TTSoft Transition Time: ”Turn-On Rise Time” & “Turn-Off Rise Time” increased by ~20%. Simplified EMC design and less critical wiring if the shortest possible edge steepness is not required. (3)
MIN-ONMinimum On-Time: Individually increased Minimum On-Time to ensure a minimum on duration indepently of control signal.  For safety relevant circuits.
MIN-OFFMinimum Off-Time: Individually increased Minimum Off-Time to ensure a minimum off duration indepently of control signal. For safety relevant circuits.
STStage Tapping:  Connectors at the individual stages of stack in order to utilize single power semiconductors. To achieve fast rise times also at very low operating voltages (<0.01xVo).
LNCLow Natural Capacitance: CN reduced by approximately 30%. To minimize capacitive power losses in applications with high switching frequency and high switching voltage (Pc= V2 x C x f).
LLLow Leakage Current: Off-state current reduced to less than 10%  of the specified value. Not available in connection with the cooling fin options and for switches of the UF series.
LNLow Noise:  Internal power driver modified for zero noise emission for a specific period of time. Relevant in conjunction with sensitive detector amplifiers (e.g. SEV/MCP applications) only.(2)
ISO-2525 kV Isolation:  Isolation Voltage increased to  25 kVDC. Housing dimensions may change for some models.
ISO-4040 kV Isolation:  Isolation Voltage increased to  40 kVDC. Housing dimensions may change for some models.  Only in connection with option PT-HV.
ISO-8080 kV Isolation:  Isolation Voltage increased to  80 kVDC. Housing dimensions may change for some models.  Only in connection with option PT-HV.
ISO-120120 kV Isolation: Isolation Voltage increased to 120 kVDC. Housing dimensions may change for some models. Only in connection with option PT-HV.
PLPassive Lock: Special inhibit function for two single switches in fast push-pull circuits. The input of the passive switch will be locked by the activated switch to avoid turn-on by noise.
I-PCIntegrated Part Components: Integration of small part components according to customer’s specifications (e.g. buffer capacitors
I-FWDIntegrated Free-Wheeling Diode:  Built-in parallel diode with short recovery time. In connection with inductive load only.
I-FWDNIntegrated Free-Wheeling Diode Network: Built-in parallel diode plus serial blocking diode  with short recovery time. In connection with inductive load only.
SPT-CShielded Pigtail for Control Connection: Cable (l=300mm
PT-CPigtail for Control Connection: Flexible leads (l=75 mm) with PCB connector. This option is only relevant for switching modules with pins. Recommended for modules with options CF & GCF.
PIN-CPins for Control Connection: Gold plated pins for printed circuit board designs (special sockets available). This option is only relevant for switching modules which have pigtails as standard.
PT-HVPigtails for HV Connection: Flexible leads with cable lugs. For increased creepage. PT-HV is standard for all types with >25 kV switching voltage. Not recommended in extremely fast circuits.
ST-HVScrew Terminals for HV Connection: Threaded inserts at the bottom of module (if not standard). For PCB design. Operation above 25 kV requires liquid insulation (Galden®/Oil) or potting.
SEP-CSeparated Control Unit. Control unit with LED indicators in a separate housing (dim. 79x38x17 mm). Linkage cable (<1m) with plug. Control unit with soldering pins or pigtails.
FOI-IFibre Optics Input / Inhibit: Additional optical inhibit input to turn-off the switch by using the inhibit input with a fibre-optical signal (only in combination with option SEP-C) (2)
FOI-CFibre Optics Input / Control: Additional optical control input to trigger the switch with a fibre-optical signal (only in combination with option SEP-C) (2)
FOO-FFibre Optical Output / Fault: Additional optical output to read-out the failure condition with a fibre-optical signal (only in combination with option SEP-C) (2)
UL94Flame Retardant Casting Resin: Casting resin according to UL-94-VO. Minimum order quantity required. (2)
FHFlange Housing: Plastic flange housing for isolated attachment on conductive surfaces. Ideal if the switch is not intended for printed circuit boards. Option PT-HV is suggested.
THTubular Housing: Tubular instead of rectangular housing. Adaption to specific ambient conditions or in case  of difficult assembly situations. (2)
FCFlat Case: Height of standard plastic housings reduced to 19 mm or less. Not in combination with cooling options CF
ITCIncreased Thermal Conductivity: Special moulding process to increase the thermal conductivity of the module. Pd(max) will be increased by approx. 20-30%. (2)
CFCopper Cooling Fins d = 0.5 mm: Fin height 35 mm. Nickel plated. For air cooling with forced or natural convection as well as for liquid cooling with non-conductive coolants.
CF-1Copper Cooling Fins d = 1 mm: Fin thickness 1.0 mm instead of 0.5 mm. The Max. Power Dissipation Pd(max) will be increased by ~80 %. For air or liquid cooling (e.g. Galden® or oil).
CF-X2"Copper Cooling Fins ""XL"": Fin area enlarged by factor 2. Recommended for natural air convection. No significant cooling power improvement in connection with forced air or liquid cooling."
CF-X3"Copper Cooling Fins ""XXL"": Fin area enlarged by factor 3. Recommended for natural air convection. No significant cooling power improvement in connection with forced air or liquid cooling."
CF-CSCopper Cooling Fins with customized shape: Individual shape to meet specific OEM requirements. (2) Can be combined with options CF-1
CF-LCCopper Cooling Fins for liquid cooling: Double fins
CF-DDouble Copper Cooling Fins: Approx. 100% more cooling power
CF-SCopper Cooling Fins: Semiconductors soldered on fins. Approx. 30% to 100% more cooling power (type depending). Combinable with options CF-D
CF-GRANon-isolated Cooling Fins made of graphite: Very light weight compared to copper at similar heat transfer
CF-CERIsolated Cooling Fins made of ceramics: Heat transfer properties similar to alumina. Forced convection recommended due to 2 mm spacing between fins. Height 35 mm.
CCSCeramic Cooling Surface: Top side of switching module made of ceramics. Heat transfer properties similar to alumina. Max. 20 kVDC isolation. Forced convection recommended.
CCFCeramic Cooling Flange: Bottom side of switching module made of a plano grinded ceramic plate. Integrated metal frame for uniform and safe contact pressure. Max. 40 kVDC isolation.
C-DRCooling for Driver: Extra cooling for the driver and control electronics. Recommended in combination with option HFS at higher switching frequencies. (2)
GCFGrounded Cooling Flange: Nickel-plated copper flange for medium power. Max. isolation voltage 40kV. Increased coupling capacitance CC.
GCF-X2Grounded Cooling Flange
ILCIndirect Liquid Cooling:  Liquid cooling for all kind of conductive coolants incl. water. Internal heat exchanger made of ceramics. For medium power dissipation.
DLCDirect Liquid Cooling: Internal cooling channels arround the power semiconductors. The most efficient cooling for high frequency applications. Non-conductive coolants only.
HI-RELHigh Reliability / MIL Versions:  Available on request. (2)
[1]New option code:  Data sheets may differ from this coding system (especially older ones) and do not indicate all possible options as per above table.   
[2]Please consult factory for detailed information.
[3]These options are EMC-relevant and are recommended for industrial power applications